Product ID:LIQUID TONER DEVELOPER
MSDS Date:01/01/1985
FSC:6850
NIIN:01-109-3910
Kit Part:Y
MSDS Number: BGMFT

Cage: 82784

Telephone: 603-880-2323

Cage: 82784

SOLVENTS(TYPE NOT SPECIFIED)

Fraction By Weight: 100%

ACGIH TLV: 300PPM

Effects of Overexposure:SKIN:PROLONGD CONT CAN
DRYING/DEFATTG,IRRITATION/DETERMATITIS.EYES:CAUSES IRRITN.**SEE
SUPP DATA

First Aid:SKIN:WASH W SOAP/WATER-EYES:FLUSH W WATER FOR 15 MIN. GET MED
ATTN.INHAL:REMOVE TO FRESH AIR.GIVE OXYGEN/CPR IF NECESSARY.GET
MED.ATTN.INGEST:DO NOT INDUCE VOMITING.KEEP PERSON WARM/QUIET.GET
MED. ATT N. IMMED.

Flash Point:104F,40C TCC
Lower Limits:0.8
Upper Limits:7.0
Extinguishing Media:FOAM,DRY CHEMICAL,CO*2,WATER FOG
Fire Fighting Procedures:USE AIR SUPPLIED BREATHING APP FOR ENCLOSED
-*SEE SUPP DATA
Unusual Fire/Explosion Hazard:DO NOT STORE/MIX W OXIDIZERS.NEVER USE
CUTTG/WELDG TORCH ON/NEAR CONTR(EVEN **SEE OTHER PRECAUTION.

Spill Release Procedures:SMALL SPILL:MOP,WIPE,SOAK-UP USING ABSORBENT
MATL & PLACE IN HOOD.LARGE SPILL:RECOVER FREE LIQ.STOP SPILL AT
SOURCE.DIKE SPILL & PUMP LIQ TO SALVAGE TANK.ABSORB REMAING LIQ
USING SAND,SAW DUST,ETC & T RANSFER TO DISPOSAL CONAINERS.

Handling and Storage Precautions:STORE IN COOL PLACE.KEEP CONTAINER
CLOSED WHEN NOT IN USE. DO NOT HANDLE/USE/TRANSFER NEAR
SPARKS,FLAMES,HEAT OR OXIDIZING MATL.USE IN WELL VENT. AREA
Other Precautions:NO SMOKING OR OPEN FLAME NEAR MATL. EMPTY CONTNR MAY
BE HAZ.OBSERVE ALL HAZ PRECAUTIONS GIVEN IN THIS DATA
SHEET.**EMPTY)BECAUSE PRODUCT CAN IGNITE EXPLOSIVELY.

Respiratory Protection:ORGANIC VAP CANISTER,OR SELF-CNTND BRETHG EQUIP
APPRVD BY NIOSH/MESA
Ventilation:LOCAL:FACE VEL >60FPM.MECHANICAL:EXPLOSION PROOF EQUIPMENT
Protective Gloves:CHEM RESISTANT
Eye Protection:SPLASH GOGG/FACE SHIELD
Other Protective Equipment:CHEM RESISTANT/APRON/IMPERVIOUS CLOTHING &
BOOTS.
Supplemental Safety and Health
**INHAL: MAY CAUSE NAUSEA/RESP IRRITN, ANESTHESIA, HEADACHES, ETC.
INGESTN: MAY CAUSE GASTROIONTESTINAL IRRITN, VOMITMG & CHEM PNNR W
WATER. AVOID BRTHG FUMES. KEY1:F4.

HCC:F4
Boiling Pt:B.P. Text:315-348F
Vapor Pres:<10
Vapor Density:5.0
Spec Gravity:0.75
Evaporation Rate & Reference:0.3(N-BUTYLACETATE
Solubility in Water:INSOLUBLE
Appearance and Odor:WATER WHITE LIQUID,MILD PARAFINIC HYDROCARBON OEOR
Percent Volatiles by Volume:100

Stability Indicator/Materials to Avoid:YES
STRONG OXIDIZING MATL &CORROSIVE MATLS.
Stability Condition to Avoid:SOURCE OF IGN.
Hazardous Decomposition Products:CO*2,FUMES,SMOKE,CO IF INCOMPLETE
COMBUSTION.
Conditions to Avoid Polymerization:UNK

Waste Disposal Methods:SM SPILL:LET EVAP LIQ IN HOOD.DESTROY REMAING
MATL BY BURNING IN IRON PAN.LG SPILL:DESTROY BY LIQUID
INCINERATION.MATL ABSORBED ON ABSORBENT MATL CAN BE DEPOSITED IN
LANDFILL IAW LOCAL,STATE,FED REGS. NEVER DRAIN/ALLOW IN SEWERW OR
WATER COURSES.

Disclaimer (provided with this information by the compiling agencies):
This information is formulated for use by elements of the Department
of Defense. The United States of America in no manner whatsoever,
expressly or implied, warrants this information to be accurate and
disclaims all liability for its use. Any person utilizing this
document should seek competent professional advice to verify and
assume responsibility for the suitability of this information to their
particular situation.